Using the Configuration Utility (continued)
Advanced > Firewall (continued)
Filter | Description | |
|
| |
Name | To give a name to an IP Filter rule | |
|
| |
Check to en- | Enable this rule if it is marked | |
able this rule | ||
|
| |
| Specifies the action to be taken when packets match the rule | |
Action | Block: Packets matching the rule will be dropped immediately | |
| Pass: Packets matching the rule will be passed immediately | |
|
| |
Protocol | Specifies the protocol(s) this filter rule will apply to | |
|
| |
Source MAC | Source MAC address | |
|
| |
Source/ | Source/Destination Interface. You can select WAN port or LAN | |
Destination IF | port or Authentication port or ALL ports | |
|
| |
Source/ |
| |
Destination IP | Source/Destination IP Address | |
Address |
| |
|
| |
Source/Destina- | Source/Destination Subnet Mask | |
tion Subnet Mask | ||
| ||
|
| |
Source/Destination | Select =(equal), != (not equal),>(greater than), <(smaller than) | |
Operator | operator rule | |
|
| |
Source/Desti- | Source/Destination Start Port | |
nation Start Port | ||
| ||
|
| |
Source/Destina- | Source/Destination End Port | |
tion End Port | ||
| ||
|
|
42
