D-Link DSA-3100 manual Home Authentication, Mode, Router, IP Address, Subnet Mask Disable

Using the Configuration Utility (continued)

Home > Authentication

The DSA-3100 allows the gateway to be set to one of three Authentication modes.

Mode:	Select NAT; NAT_IP_PNP or Router
	NAT:	This mode protects the identity of the devices within
		the LAN from those devices outside the network.
	NAT_IP_PNP: All devices, regardless of their IP address, can gain
		access to the Internet through the DSA-3100 in this
		mode.
	Router:	In this mode, the DSA-3100 will not protect the
		identity of the connected devices by translating their
		IP addresses and shielding them from detection
		outside the LAN.
IP Address:	Enter the IP address for the Authentication interface (e.g., the RADIUS
	server in the network).

Subnet Mask:

Disable

DHCP

Server:

Enter the subnet mask for the Authentication interface

Make this selection if you do not wish to use the built-in DHCP feature in the DSA-3100

21continued -