Samsung SCX-6555NX manual Network Setup, Authentication

NETWORK SETUP

You may set up the network with the machine's touch screen. Before doing that, you must have the information concerning the type of network protocols and computer system you use. If you are not sure which setting to use, contact your network administrator to configure this machine network.

1.Press Machine Setup on the control panel.

2.Press Admin Setting. When the login message pops up, enter password and press OK.

3.Press the Setup tab > Network Setup.

OPTION	DESCRIPTION
TCP/IP Protocol	Select appropriate protocol and configure
	parameters to use the network environment.
	There are lots of parameters to be set,
	therefore, if you are not sure, leave as it is,
	or consult the network administrator.
Ethernet Speed	Configure the network transmission speed.
Clear Setting	Reverts the network settings to the default values.
802.1x	You can select the user authentication for network
	communication.
	For details information consult the network admin-
	istrator.
IPv6	Selects this option to use the network environment
	through IPv6.

AUTHENTICATION

This feature lets you control and lock all outgoing data, or change the password.

1.Press Machine Setup on the control panel.

2.Press Admin Setting. When the login message pops up, then enter password and press OK.

3.Press the Setup tab > Authentication.

OPTION	OPTION	DESCRIPTION
Authentication	No	It disables Authentication Mode.
Mode	Authentication
	Mode
	Network	It enables the authentication mode
	Accounting	which can be used for Job
		Accounting Plug-in the
		SyncThru™ Web Admin Service.
	Standard	You can set the local account for a
	Accounting	certain user. If the user with that
		account performs the printing job,
		the machine counts it.
	Foreign Device	When you install the optional FDI
	Interface	kit, select Foreign Device
		Interface Configuration Setup to
		activate it.
		• Job Timer: If there is not
		enough credit, you can set the
		machine to cancel a job right
		away or wait a designated
		amount of time for a deposit.
		• Print Job Control: When it is
		enabled, the both computer
		printing and copying are
		possible since the credit
		remains. With Disable, only
		the copy printing job needs the
		credit. (which means a
		computer printing a report or a
		fax job needs no credits)
		• Inhibit Services: When no
		credit is left, the machine
		disables the copy job only with
		Copy Only. With All Services,
		scanning service and copy job
		are disabled.

80