XOA button
When you press this button, you can use the XOA applications from the display screen. Before using the XOA applications, they should be installed. If the XOA button is not displayed, make sure that the machine gets XOA license. For more information, contact your local Samsung dealer or the
retailer where you purchased your machine.
If the message asking Auth. ID and Password, if means the network administrator has set the suthentication in Syncthru Web Service.(See "Managing your machine from the website" on page 21.)
Power Saver Button
When the machine is not in use, save electricity with the provided power save mode. Pressing this button puts the machine into power save mode. (See "Using energy saving feature" on page 30.)
If you press this button for more than two seconds, a window appears, requesting that you turn the power off. If you choose Yes, the power is turned off. This button can also be used to turn the button on.
| STATUS | DESCRIPTION | |
|
|
|
|
Off |
|
| The machine is not in the power save mode. |
|
|
|
|
Blue |
| On | The machine is in the low power save mode. |
|
|
|
|
|
| Blink | The machine is in the power save mode. |
|
|
|
|
Interrupt button
When you press this button, the machine goes into interrupt mode which means it stops a printing job for urgent copy job. When the urgent copy job completes, the previous printing job continues.
| STATUS | DESCRIPTION | |
|
|
|
|
Off |
|
| The machine is not in interrupt printing mode. |
|
|
|
|
Blue |
| On | The machine is in interrupt printing mode. |
|
|
|
|
Interrupt mode is resumed at default value (Off) after the machine is shut down or reset.
MANAGING YOUR MACHINE FROM THE WEBSITE
If you have connected your machine to a network and set up TCP/IP network parameters correctly, you can manage the machine via Samsung’s SyncThru™ Web Service, an embedded web server. Use SyncThru™ Web Service to:
•View the machine’s device information and check its current status.
•Change TCP/IP parameters and set up other network parameters.
•Change the printer properties.
•Set the machine to send email notifications to let you know the machine’s status.
•Get support for using the machine.
To access SyncThru™ Web Service:
1.Start a web browser, such as Internet Explorer, from Windows.
2.Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.
Your machine’s embedded website opens.
3.Click Login.
The
4.Enter the administrator’s ID and password then click Login.
• Enter the same administrator’s ID and password to the touch screen.
•If you do not login with administrator’s ID and password, you can see the machine’s information only.
5.Change the settings as you want such as the machine settings, network parameters, etc.
21
