Samsung SCX-6555NX manual Setting The Paper Size And Type, Press Admin Setting

4.Squeeze the multi-purpose tray paper width guides and adjust them to the width of the paper. Do not force too much, or the paper will be bent, which will result in a paper jam or skew.

Depending on the media type you are using, keep the following loading guidelines:

•Envelopes: Flap side down and with the stamp area on the top left side.

•Transparencies: Print side up and the top with the adhesive strip entering the machine first.

•Labels: Print side up and top short edge entering the machine first.

•Preprinted paper: Design side up with the top edge toward the machine.

•Card stock: Print side up and the short edge entering the machine first.

•Previously printed paper: Previously printed side down with an uncurled edge toward the machine.

5.After loading paper, set the paper type and size for the multi-purpose tray. See "Setting the paper size and type" on page 40 for copying and faxing or the Software section for PC-printing.

The settings made from the printer driver override the settings on the control panel.

6.After printing, fold the multi-purpose tray extension and close the multi-purpose tray.

SETTING THE PAPER SIZE AND TYPE

After loading paper in the paper tray, you need to set the paper size and type. These settings will apply to Copy and Fax modes.

For PC-printing, you need to select the paper size and type in the application program you use on your PC.

1.Press Machine Setup on the control panel.

2.Press Admin Setting.

3.When the login message appears, enter password with number keypad and press OK. (See "Setting the authentication password" on page 30.)

4.Press the General tab.

5.Press the down arrow to switch the screen, press Tray Management.

6.Select tray and its options such as paper size and type.

7.Press OK.

40