Samsung SCX-6555NX Copying ID with the manual ID copy option, Up or 4-up copying N-up

• If the original is larger than the printable area, some portions may not be printed.

•If this option is grayed out, select the Duplex option to 1 -> 1 Sided, the Output option to Collated.

Copying ID with the manual ID copy option

If you want to copy several ID cards on a paper, or adjust the copying position of the page, follow the next steps.

Next steps are the procedure when you copy two people's driver's license cards (100mm X 80mm) in one page.

1Press Machine Setup on the control panel.

2Select Admin Setting. When the login message pops up, then enter password and press OK.

3Press the Setup tab > Copy Setup > Mamual ID Copy Setup.

4Press the number from the template list table.

5Press Edit Template.

6Selec the appropriate option values and press OK.

•Template Name: Enter the template name.

•Scan Position: Select the position for scanning. You should select the largest scanning position out of the originals.

LEFT, TOP : X-000mm/Y-000mm, RIGHT, BOTTOM: X-110mm/Y- 090mm

•Number of Images: Select how many images are on a page. (select number 4.)

•Image Position: Select the position of a page which images are on. If you choose to copy four images, you have to select four positions here.

•First Image Position: LEFT, TOP : X-000mm/Y-020mm, RIGHT,

BOTTOM: X-100mm/Y-100mm

•Second Image Position: LEFT, TOP : X-105mm/Y-020mm, RIGHT,

BOTTOM: X-205mm/Y-100mm

•Third Image Position: LEFT, TOP : X-000mm/Y-150mm, RIGHT,

BOTTOM: X-100mm/Y-230mm

•Forth Image Position: LEFT, TOP : X-105mm/Y-150mm, RIGHT,

BOTTOM: X-205mm/Y-230mm

7Press OK, the template you have saved will be shown in the template list table.

8Press and select Copy.

9Press the Advanced tab > ID Copy > Mamual ID Copy Setup.

10Press the template you have saved from the template list.

11Press the Start button on the control panel. now follow the instruction on display to finish the ID copy for four images

2-up or 4-up copying (N-up)

The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of paper.

2 or 4-up copying is available only when you load originals into the DADF.

1	2
2
3	4
1

1.Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (See "Loading originals" on page 33.)

2.Press Copy from the Main screen.

3.Select the tray in Paper Supply.

4.Press the Advanced tab > N-Up.

5.Select Off, 2Up, or 4Up.

•Off: Copies an original onto one sheet of paper.

•2Up: Copies two separate originals onto one page.

•4Up: Copies four separate originals onto one page.

6.Press Start on the control panel.

You cannot adjust the copy size using the Reduce/Enlarge for the N- Up feature.

Poster copying

Your original will be divided into 9 portions. You can paste the printed pages together to make one poster-sized document. This copy feature is available only when you place originals on the scanner glass. Each portion is scanned and printed on by one in the following order.

This copy feature is available only when you place originals on the scanner glass.

45