Samsung SCX-6555NX Tray Confirmation Message is to activate, Altitude, Adjustment, Output Options

OPTION	DESCRIPTION
Power Saver	You can reduce energy consumption by setting
	these features. Power Saver has three options,
	first Scan Power Save turns off the scanner lamp
	under the glass. And Power Save turns off all the
	fans within the machine after a certain time. Low
	Power Save turns off the fans within the machine
	except a core fan for the fuser unit. (See "Using
	energy saving feature" on page 30.)
Tray Management	This feature allows you to select the tray and
	paper you use for a printing job. Paper size, paper
	type, and paper color options are adjusted here.
	Tray Confirmation Message is to activate the
	window asking whether you set the paper size and
	type for the just opened tray.
	• Auto Tray Switch: If tray1 and tray2 are filled
	with letter size paper, when tray1 is empty and
	this option is On, then the machine continues
	printing with paper in tray2.
	• Auto Continue: When the paper is
	mismatched, meaning that tray1has filled with
	the letter size paper, but the printing job needs
	A4 size paper, the machine will wait for 30
	seconds to paper in tray1 with proper sized
	paper. After 30 seconds, the machine
	automatically starts printing with Letter sized
	paper.
	• Paper Substitution: When the paper is
	mismatched, this option sets the machine print
	A4 size paper in the Letter size paper or vice
	versa.
	• Wide A4: It is useful when printing in DOS
	mode. This option prints 80 charactors in a
	line, which printing 78 charactors in a line is
	usual in DOS mode.
Altitude	Print quality is affected by atmospheric pressure,
Adjustment	which atmospheric pressure is determined by the
	height of the machine above sea level. This
	feature lets you adjust the altitude in a height
	district. Higher altitude location need to set this
	feature to High 3, which affects print quality.
Output Options	Output Options is for, when the staples run out,
	you to let the machine stop processing and wait to
	refill the staples or continue the job. If you set
	Within Job Offsetting to On, the output paper is
	placed and sorted by printout-sets.
Contention	This feature lets you to select the priority between
Management	copy jobs and print jobs.
	• Priority: Set the priority by numbering the job.
	The machine starts from the least to the
	highest number in order.
	• First In, First Out: The machine does an
	asked job in order.
Sound	You can adjust the loudness of the machine
	sound. Press Fault to adjust the machine's error
	sound. Select Conflict if you pressed the wrong
	option. Press Selection to sound whenever you
	press the selection from your touch screen.

OPTION	DESCRIPTION
Supplies	The machine gives you the notification of the
Management	imaging unit and toner cartridge to reorder, and
	resets the used fuser counter, bias transfer roller,
	feed roller and document feeder friction pad
	counter.
Machine Test	The machine prints the test image patterns using
	Image Quality Test Patterns.
HDD Spooling	To spool documents in HDD for the network
	printing, select On.
On Demand	You can set the machine to delete previous job
Overwrite	information on HDD as you store new job
	information. To activate this feature, go to Admin
	Setting > the Setup tab > Optional Service and
	set the On Demand Image Overwrite option to
	Enable. After activating this feature you can
	overwrite a HDD by pressing Start in the display.
Stored Job File	You can choose the file policy for generating file
Policy	name before you proceed with the job through
	HDD. If the HDD memory already has the same
	name when you entered a new file name, you can
	rename or overwrite it.
	• Rename: If the HDD memory already has the
	same name when you enter a new file name,
	the file will be saved as a different name that is
	automatically programmed.
	• Overwrite: You can set the machine to delete
	previous job information on HDD as you store
	new job information.
Country	You can change the country, then some the
	values for fax and paper size will be changed
	automatically for your country.
	After installing the fax kit, you must change the
	country.
Home Window	You can change the touch screen’s background
Background	image.
Multi-Bin	You can choose the output mode for printouts.
	• Mailbox: Printouts are stacked in the bin you
	have set. If you set the mailbox to Bin3,
	printouts will be stacked in Bin3.
	• Job Separator: Printouts are stacked in the
	sequence of job order in each bin. However, if
	there is a vacant bin left, the vacant bin has
	priority, which means prinouts will be stacked
	there first.
	• Collator: Printouts are stacked in sets to
	match the sequence of originals in each bin.
	• Stacker: Printouts are stacked in bins one-by-
	one. When Bin1 is full, printouts will be stacked
	in Bin2.
	You can only use this feature if you have
	installed optional 2-Bin Finisher or 4-Bin
	Mailbox.

77