Samsung SCX-6555NX manual Duplex, Resolution, Original Size, Original Type, Color Mode

•Scan Preset: Automatically changes some scan options such as file format, resolution, and more. You can adjust options to fit each specific purpose. (See "Scan Preset" on page 73.)

•File Format: Selects the file format of the scan output. (See "File Format" on page 73.)

•File Policy: Selects the file format of the scan output. (See "File Policy" on page 73.)

•Back: Returns to the previous screen.

CHANGING THE SCAN FEATURE SETTINGS

This part explains how to adjust the document settings for each scan job, such as resolution, duplex, original size, type, color mode, darkness, and more. The options you change will be maintained for a certain time, but after that period, the options will be reset to default values.

Duplex

This feature especially applies when the original documents to be scanned are two-sided. You can select whether the machine scans only one side of the paper or both sides of the paper.

Press USB > Scan to USB > the Basic tab > Duplex. Use left/right arrows to toggle the values.

•1 Sided: For originals that are printed on one side only.

•2 Sided: For originals that are printed on both sides.

•2 Sided, Rotate Side 2: For originals that are printed on both sides. But the back is rotated 180 degrees.

To use 2 Sided and 2 Sided, Rotate Side 2, you have to load the originals on the DADF. Because, if the machine can not detect the original on DADF, automatically changes the option to 1 Sided.

Resolution

You can adjust document resolution.

Press USB > Scan to USB > the Basic tab > Resolution. Use left/right arrows to toggle the values. The higher value you select the clear result you get. But the scanning time may take longer.

Original Size

The machine senses and determines the size of the original.

Press USB > Scan to USB > the Advanced tab > Original Size. Use up/ down arrows to go to the next screen. Select the appropriate option and press OK.

Original Type

You can set the original document type in order to enhance the quality of a document being scanned.

Press USB > Scan to USB > the Image tab > Original Type. Select the appropriate option and press OK.

•Text: For originals that have text or line art.

•Text/Photo: For originals that have both text and photographs together.

•Photo: For originals that are continuous tone photographs.

Color Mode

Use this option to scan the original in Mono, Gray or Color mode.

Press USB > Scan to USB > the Image tab > Color Mode. Select the appropriate option and press OK.

•Color: Uses color to display an image. 24 bits per pixel, 8 bits for each RGB, is used for 1 pixel.

•Gray: Uses the black gradation to display an image. 8 bits per pixel.

•Mono: Displays an image in black and white. 1 bit per pixel.

The file format JPEG cannot be selected if Mono has been selected for Color Mode.

72