Samsung SCX-6555NX manual Installing The Software, Macintosh, Linux

Macintosh

OPERATIN		REQUIREMENT (RECOMMENDED)
G SYSTEM		CUP	RAM	FREE HDD
				SPACE
Mac OS X	•	PowerPC G4/	• 128 MB for a	1 GB
10.4 or lower		G5	PowerPC based
	•	Intel	MAC (512 MB)
		processors	• 512 MB for an
			Intel based MAC
			(1 GB)
Mac OS X	•	867 MHz or	512 MB (1 GB)	1 GB
10.5		faster
		PowerPC G4/
		G5
	•	Intel
		processors
Mac OS X	•	Intel	1 GB (2 GB)	1 GB
10.6		processors

Linux

ITEM	REQUIREMENTS
Operating system	Red Hat 8 ~ 9
	Fedora Core 1 ~ 4
	Mandrake 9.2 ~ 10.1
	SuSE 8.2 ~ 9.2
CPU	Pentium IV 1 GHz or higher
RAM	256 MB or higher
free HDD space	1 GB or higher
Connection	USB interface or Network interface
Software	Linux Kernel 2.4 or higher
	Glibc 2.2 or higher
	CUPS
	SANE

• It is necessary to claim swap partition of 300 MB or larger for working with large scanned images.

•The Linux scanner driver supports the optical resolution at maximum.

INSTALLING THE SOFTWARE

You have to install the machine software for printing. The software includes drivers, applications, and other user friendly programs.

• The following procedure is for when the machine is being used as a network machine. If you want to connect a machine with a USB cable, refer to Software section.

•The following procedure is based on the Windows XP operating system. The procedure and popup window which appears during the installation may differ depending on the operating system, the printer feature, or the interface in use. (See Software section.)

1.Make sure that the network setup for your machine is completed. (See "Setting up the network" on page 26.) All applications should be closed on your computer before beginning installation.

2.Insert the Printer Software CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears.

If the installation window does not appear, click Start > Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.

If you use Windows , Windows 7 and Windows Server 2008 R2, click Start > All Programs > Accessories > Run, and type X:\Setup.exe. If the AutoPlay window appears in Windows , Windows 7 and Windows Server 2008 R2, click Run Setup.exe in Install or run program field, and click Continue in the User Account Control window.

3.Click Next.

•The window above may slightly differ, if you are reinstalling the driver.

4.Select Typical installation for a network printer, and then click Next.

28