Samsung SCX-6555NX manual Setting up an FTP server, Setting up an SMB server

4.Enter the IP address in dotted decimal notation or as a host name.

5.Enter the server port number, from 1 to 65535. The default port number is 25.

6.Check the box next to SMTP Requires Authentication to require authentication.

7.Enter the SMTP server login name and password.

8.Click Apply.

If the authentication method of SMTP server is POP3beforeSMTP, check the box next to SMTP Requires POP3 Before SMTP Authentication.

a.Enter the IP address in dotted decimal notation or as a host name.

b.Enter the server port number, from 1 to 65535. The default port number is 25.

Setting up an FTP server

To use an FTP server, you need to set up parameters to access the FTP servers using SyncThru Web Service.

1.Enter your machine’s IP address as the URL in a browser and click Go to access the web site of your machine.

2.Click Machine Settings and FTP Setup.

3.Click Server List.

4.Click Add.

5.Select the index number, from 1 to 20.

6.Enter a name in Alias for the Setup for the corresponding Server List entry. This name will be displayed on your machine.

7.Select IP Address or Host Name.

8.Enter the server address in dotted decimal notation or a host name.

9.Enter the server port number, from 1 to 65535. The default port number is 21.

10.Check the box next to Anonymous if you want the FTP server to permit access to unauthorized persons.

It is unchecked by default.

11.Enter the login name and password.

12.Enter the Scan File Folder under FTP directory for saving the scanned image.

13.Click Apply.

Setting up an SMB server

To use an SMB server, you need to set up parameters for access to SMB servers using SyncThru Web Service.

1.Enter your machine’s IP address as the URL in a browser and click Go to access the web site of your machine.

2.Click Machine Settings and SMB Setup.

3.Click Server List.

4.Click Add.

5.Select the index number, from 1 to 20.

6.Enter a name in Alias for the Setup for the corresponding Server List entry. This name will be displayed on your machine.

7.Select IP Address or Host Name.

8.Enter the server address in dotted decimal notation or a host name.

9.Enter the server port number, from 1 to 65535. The default port number is 139.

10.Enter the Share name of the server.

11.Check the box next to Anonymous if you want to permit unauthorized persons to access the SMB server.

This box is unchecked by default.

12.Enter the login name and password.

13.Enter the domain name of the SMB server.

14.Enter the Scan File Folder under shared folder for storing the scanned image.

15.Click Apply.

55