Samsung SCX-6555NX manual Copy Setup, Fax Setup

COPY SETUP

For copy output, you can set up several options in advance.

1.Press Machine Setup on the control panel.

2.Press Admin Setting. When the login message pops up, enter password and press OK.

3.Press the Setup tab > Copy Setup.

OPTION	DESCRIPTION
Page Number	If you select this option On, each copy will include
	the page number on the bottom of each page.
Time & Date	Set this option On in order to print the date and
	time on each copy, set from the General tab.
ID Stamp	This option is used to set words or a message to
	print on your copies. Set this option On and an
	input screen will be displayed, write your message
	using the pop up keyboard.
Manual ID Copy	This option sets the ID copy settings such as the
Setup	number of images or copying positions manually.
	(See "Copying ID with the manual ID copy
	option" on page 45.)

FAX SETUP

This machine offers you with various options to you for setting up the fax system. You can change the default settings for your preferences and needs.

1.Press Machine Setup on the control panel.

2.Press Admin Setting. When the login message pops up, enter password and press OK.

3.Press the Setup tab > Fax Setup.

The fax options are different from country to country depending on the international communication regulatory. If the display screen does not show or gray out some of the fax options explained herein, it means that the grayed out function does not supported in your communication environment.

OPTION	DESCRIPTION
Machine ID & Fax	Enter the machine ID and fax number which will
No	be printed at the top of each page. Select the
	country name. This option usually pre-set for user.
Receive Start Code	This feature works best when you are using an
	extension telephone connected to the EXT socket
	on the back of your machine. You can receive a
	fax from someone you are talking to on the
	extension telephone, without going to the fax
	machine. (See "Receiving faxes manually using
	an extension telephone" on page 63.)
Error Correction	It helps with poor line quality and makes sure any
Mode	faxes you send are properly transmitted to any
	other ECM-equipped fax machines. Sending a fax
	using ECM may take more time.
Fax Initial Setup	You can set Receive Mode for Telephone, Fax or
	Answering Machine/Fax, and Dial Mode at either
	Pulse (Dial Pulse) or Tone (Multi Frequency).
	When you select Answering Machine/Fax, you
	can receive a fax while the line is being used by
	the answering machine. (See "Changing the
	receive modes" on page 63.)
	Contact your local telephone company for Dial
	Mode setting information.
Ring to Answer	You can specify the number of times the machine
	rings before answering an incoming call.
Receive Header	Use this option to automatically print the page
	number, date and time of fax reception at the
	bottom of each page.
Secure Receive	You may need to prevent your received faxes from
	being accessed by unauthorized people. This
	feature restricts printing of received faxes when
	the machine is unattended. If you select this
	option to On, all incoming faxes go into memory.
	A four-digit Passcode is used when you want to
	print out received faxes in memory. (See
	"Receiving in secure receiving mode" on
	page 63.)
Received Fax	When receiving a fax containing pages longer
Printing	than the paper loaded in the tray, the machine can
	reduce the size of the original to fit the size of the
	paper loaded in the machine. If this feature is set
	to Off, the machine cannot reduce the original to
	fit onto one page. The original will be divided and
	printed in actual size on two or more pages. If you
	set this option to On and set the discard size to
	10mm and the received data is longer then the
	currently set paper in the tray, the machine
	minuses the data that would have been on the
	specified discard segment.

78