AMX NXD-700Vi EAP-PEAP Settings, Certificate Authority, Peap Version, Inner Authentication Type

Firmware Pages and Descriptions

EAP-PEAP security is designed for wireless environments where it is necessary to transmit data securely over a wireless network.

EAP-PEAP Settings

SSID (Service Set Identifier):	Opens an on-screen keyboard to enter the SSID name used on the target
	WAP.
	The SSID is a unique name used by the WAP, and is assigned to all panels
	on that network. An SSID is required by the WAP before the panel is permit-
	ted to join the network.
	• The SSID is case sensitive and must not exceed 32 characters.
	• Make sure this setting is the same for all points in your wireless network.
	• NXA-WAP200Gs use AMX as their default SSID.
	• With EAP security, the SSID of the WAP must be entered. If it is left blank,
	the panel will try to connect to the first access point detected that supports
	EAP. However, a successful connection is not guaranteed because the
	detected WAP may be connected to a RADIUS server, which may not
	support this EAP type and/or have the proper user identities configured.
Identity:	Opens an on-screen keyboard. Enter an EAP Identity string (used by the
	panel to identify itself to an Authentication (RADIUS) Server).
	Note: This information is similar to a username used to login to a secured
	server or workstation. This works in tandem with the Password string which is
	similar to the password entered to gain access to a secured workstation. Typ-
	ically, this is in the form of a username such as: jdoe@amx.com.
Password:	Opens an on-screen keyboard. Enter the network password string specified
	for the user entered within the Identity field (used by the panel to identify itself
	to an Authentication (RADIUS) Server)
	Note: This information is similar to the password entered to gain access to a
	secured workstation.
Certificate Authority:	When pressed, the panel displays an on-screen Certificate Authority (CA)
	File Location keyboard which allows you to enter the name of the certificate
	authority file which is used to validate the server certificate.
	This field is optional.
	If a server certificate is used, it should first be downloaded into the panel and
	the Certificate Authority field should then be set to the name of that certificate
	file. No file path should be used for this setting as all certificates are stored in
	a specific directory that the user cannot control or change.
	• Use the on-screen keyboard’s Clear button to completely erase any
	previously stored network path information.
PEAP Version:	When pressed, this field cycles through the choices of available PEAP:
	PEAPv0, PEAPv1, or PEAPv1 w/peaplabel=1.
Inner Authentication Type:	When pressed, this field cycles through the choices of available Inner
	Authentication mechanisms supported by the Devicescape Secure Wireless
	Client. The most commonly used are: MSCHAPv2 and GTC.
	• MSCHAPv2 (used with PEAPv0)
	• TLS
	• GTC (used with PEAPv1)
	• OTP
	• MD5-Challenge
Save/Cancel:	• Save - store the new security information, apply changes, and return to the
	previous page.
	• Cancel - discard changes and return to the previous page.

Refer to the EAP Authentication section on page 195 for further details on these security options.

7" Modero Widescreen Touch Panels 93