AMX NXD-700Vi manual Panel Information Page Elements

	Firmware Pages and Descriptions
Project Information Page Elements (Cont.)
AMX IR 455k	Displays the AMX 455 kHz IR channel port used by the IR receiver on the
Assigned Port:	panel.
	This information is pulled by the panel from AMX IR Receivers section of the
	TPD4 Project Properties > IR Emitters & Receivers tab.
	• For IR reception, this is the port that reports a push on for the corresponding
	IR code.
	• IR receivers and transmitters on G4 panels share the device address number
	of the panel.
Build Number:	Displays the build number information of the TPD4 software used to create the
	project file.
Creation Date:	Displays the project creation date.
Revision Date:	Displays the last revision date for the project.
Last Save Date:	Displays the last date the project was saved.
Blink Rate:	Displays the feedback blink rate (10th of second).
Job Comments:	Displays any comments associated to the job. These comments are taken from
	the TPD4 project file.

Panel Information Page

The Panel Information page (FIG. 57) centers around Modero panel properties such as: resolution used, on-board memory, firmware, address/channel information, and string information.

FIG. 57 Panel Information page (takes its’ information from the touch panel)

The elements of the Panel Information page are described in the table below:

Panel Information Page Elements

Back:	Returns you to the previously active touch panel page.
Connection Status icon:	This visual display of the connection status allows the user to have a current
	visual update of the panel’s connection status regardless of what page is
	currently active.
	• A Lock only appears on the icon if the panel has established a connection
	with a currently secured target Master (requiring a username and password).

7" Modero Widescreen Touch Panels 67