AMX NXD-700Vi manual WPA-PSK Settings, Current Key, Authentication

Firmware Pages and Descriptions

Static WEP Settings (Cont.)

Current Key:	Displays the current WEP key in use.
	• When working with a single panel and a single WAP, it is recommended that
	you manually enter the Current Key from the WAP into the selected WEP
	Key.
	• When working with a single WAP and multiple panels, it is recommended
	that you generate a Current Key using the same passphrase on all panels
	and then enter the panel-produced WEP key manually into the Wireless
	Access Point.
	• Keys may also be examined by touching the key buttons and noting the
	keyboard initialization text.
	• Use the on-screen keyboard’s Clear button to erase stored key information.
Authentication:	Toggles between the two authentication modes: Open + WEP (broadcast
	publicly) or Shared + WEP (encrypted).
	• An Open + WEP network allows connections from any client without
	authentication.
	• A Shared + WEP network requires the client to submit a key which is
	shared by the network WAP before it is given permission to associate with
	the network. In this case the key is the same as the WEP encryption key.
	In either case, if WEP encryption has been enabled, the client will still require
	the WEP key to encrypt and decrypt packets in order to communicate with the
	network.
Save/Cancel:	• Save - store the new security information, apply changes, and return to the
	previous page.
	• Cancel - discard changes and return to the previous page.

Refer to the Configuring a Wireless Network Access section on page 33 for further details on these security options.

Refer to the Using the Site Survey tool section on page 34 for more information on using this feature.

WPA-PSK Settings

Press the Static WEP button to opens the Static WEP Settings dialog (FIG. 69).

FIG. 69 Wireless Settings page - WPA-PSK Settings

86 7" Modero Widescreen Touch Panels