AMX NXD-700Vi Installation of an NXD Touch Panel, Installing the NXD panel within a Conduit Box

Installation

3.Remove the wiring knockouts from the left side of the conduit box (CB-TP7) (FIG. 11) to accommodate the cables being threaded through to the NXD touch panel.

Remember that when mounting this conduit box, the NXD mounting tabs must lie flush against the outside of the sheetrock.

4.Thread the incoming power, RJ-45 audio/video, Ethernet, and USB wiring through the knockouts (use of the left wiring knockouts are recommended with this installation).

Leave enough slack in the wiring to accommodate any re-positioning of the panel.

5.Install the drywall/sheetrock before inserting the main NXD unit into the CB-TP7.

Installation of an NXD Touch Panel

The NXD-700Vi can be installed either directly into the (optional) CB-TP7 or other solid surface environment using the two different mounting options: drywall clips or solid surface screws. The following sections describe mounting the touch panel directly into a pre-wall conduit box, a solid surface or drywall, and optional NXA-RK7 Rack Mount Kit.

Installing the NXD panel within a Conduit Box

The conduit box must be mounted prior to continuing this section. Refer to the procedures in the Pre-Wall Installation of the Conduit Box section on page 16 for detailed pre-wall installation instructions. Verify that all necessary cables have been threaded through the knockouts on the left of the conduit box and the connections have been tested prior to installation of the NXD-700Vi.

1.Remove the Faceplate/bezel (A in FIG. 12) from the main NXD unit (B in FIG. 12) by gripping the faceplate and pulling with gentle outward force.

C - Optional CB-TP7

conduit/wallbox

#4-40 Mounting Screws

(four - included)

secure the NXD to

the Conduit Box

Stud

Mounting Tab

B - Main NXD unit consists of

the touch panel and back box housing

A - Faceplate/Trim Ring

default Faceplate comes with buttons

FIG. 12 NXD-700Vi panel installation into a CB-TP7 (pre-wall construction)

7" Modero Widescreen Touch Panels 17