AMX NXD-700Vi manual Wireless Settings

Firmware Pages and Descriptions

System Settings Page Elements (Cont.)

Master Connection (Cont.):

System Number

Master IP/URL

Master Port Number

Username/Password

Allows you to enter a system number. Default value is 0 (zero).

(ETHERNET Only - disabled when USB is selected)

Sets the Master IP or URL of the NetLinx Master.

(ETHERNET Only - disabled when USB is selected)

Allows you to enter the port number used with the NetLinx Master.

•Default value is 1319. (ETHERNET Only - disabled when USB is selected)

If the target Master has been previously secured, enter the alpha-numeric string (into each field) assigned to a pre-configured user profile on the Master.

This profile should have the pre-defined level of access/configuration rights.

Refer to the Step 3: Choose a Master Connection Mode section on page 43 for more detailed information on using the System Settings page.

Wireless Settings Page

Use the options on the Wireless Settings page (FIG. 66) to configure communication settings for the wireless CF card (802.11g), and read the device number assigned to the panel.

FIG. 66 Wireless Settings page (reads from and assigns values to the WAP)

Features on this page include:

Wireless Settings Page

Back:	Saves all changes and returns to the previous page.
Connection Status icon:	The icon in the upper-right corner of each Setup page provides a constant
	visual indication of current connection status.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.

7" Modero Widescreen Touch Panels 79