INSTALLATION
For best performance, mount the fixture about 1.8 meters above the ground.
WARNING: Turn power off at circuit breaker.
1. | Remove | 2. Remove | |
| two nuts. | ||
|
|
WIRING
BLACK
WHITE
One Motion Light
BLACKBLACK
WHITE | WHITE |
Two Motion Lights
3.Tighten screws finger tight.
SENSITIVITY
MIN 
MAX
4.Set sensitivity on fixture back to the
❒Twist the junction box wires and the fixture wires together as shown below. Secure with wire connectors. If you have a metal junction box, you may not need the green“pigtail”.If you are unsure about the grounding method, consult your local building code.
5. Attach |
junction box |
Junction |
Box |
Due to the size and weight of the fixture, you may find it helpful to have an assistant hold the fixture in place while connecting the wires.
CAUTION: DO NOT connect the RED wire unless you want to control other lights from the motion sensor.
Recommended Grounding Method
Use a green ground “pigtail” (not provided) and twist one end together with the bare fixture wire and the box ground wire. Secure with a wire connector. Secure the other end of the “pigtail” with the GND screw on the
Black to black | White to white |
