AMX NXD-700Vi manual Protected Setup page-System Recovery confirmation dialog

Firmware Pages and Descriptions

Protected Setup Page Elements (Cont.)

System Recovery:

Allows you to either reset the touch panel to factory default settings and/or wipe out all existing touch panel pages:

•The Reset System Settings button allows a user to wipe out all current configuration parameters on the touch panel (such as IP Addresses, Device Number assignments, Passwords, and other presets).

-Pressing this button launches a Confirmation dialog (FIG. 63) which asks you to confirm your selection.

-This dialog is configured with a delay timer that does not enable the YES button for 5 seconds. This delay provides an additional amount of time for the user to confirm their decision.

•The Remove User Pages button allows you remove all current TPD4 touch panel pages currently on the panel (including the pre-installed AMX Demo pages).

-Pressing this button launches a Confirmation dialog (FIG. 63) which asks you to confirm your selection.

-This dialog is configured with a delay timer that does not enable the YES button for 5 seconds. This delay provides an additional amount of time for the user to confirm their decision.

You have a wait time of 5 seconds before the YES option is enabled.

FIG. 63 Protected Setup page-System Recovery confirmation dialog

76 7" Modero Widescreen Touch Panels