Advantech PCI-6872 user manual Save & Exit Setup, Exit Without Saving

2.When you see “Enter Password,” enter the existing password and press <Enter>.

3.You will see “Confirm Password.” Type it again, and press <Enter>.

4.Select Set Password again, and at the “Enter Password” prompt, don’t enter anything; just press <Enter>.

5.At the “Confirm Password” prompt, again don’t type in anything; just press <Enter>.

6.Select Save to CMOS and EXIT, type <Y>, then <Enter>.

4.2.12 Save & Exit Setup

If you select this option and press <Y> then <Enter>, the values entered in the setup utilities will be recorded in the chipset’s CMOS memory. The microprocessor will check this every time you turn your system on and use the settings to configure the system. This record is required for the system to operate.

4.2.13 Exit Without Saving

Selecting this option and pressing <Enter> lets you exit the Setup pro- gram without recording any new values or changing old ones.

PCI-6872 User’s Manual 38