AMX NXD-700Vi manual Configuring Communication

Table of Contents
If Calibration Is Not Working	29
Configuring Communication	31
Modero Setup and System Settings	31
Accessing the Setup and Protected Setup Pages	31
Setting the Panel’s Device Number	32
Wireless Settings Page - Wireless Access Overview	32
Hot Swapping	32
Configuring a Wireless Network Access	33
Step 1: Configure the Panel’s Wireless IP Settings	33
Wireless communication using a DHCP Address	33
Wireless communication using a Static IP Address	34
Using the Site Survey tool	34
Step 2: Configure the Card’s Wireless Security Settings	36
Configuring the Modero’s wireless card for unsecured access to a WAP200G	37
Configuring the Modero’s wireless card for secured access to a WAP200G	39
Automatically set SSID	39
Manually set SSID	40
Configuring multiple wireless Moderos to communicate to a target WAP200G	43
Step 3: Choose a Master Connection Mode	43
USB	43
Prepare your PC for USB communication with the panel	44
Configure the panel for USB communication	44
Configure a Virtual NetLinx Master using NetLinx Studio	45
Ethernet	47
Master Connection to a Virtual Master via Ethernet	47
Using G4 Web Control to Interact with a G4 Panel	50
Using your NetLinx Master to control the G4 panel	52
Upgrading Modero Firmware	55
Upgrading the Modero Firmware via the USB port	55
Step 1: Configure the panel for a USB Connection Type	55
Step 2: Prepare NetLinx Studio for communication via the USB port	56
Step 3: Confirm and Upgrade the firmware via the USB port	57
Upgrading the Modero Firmware via Ethernet (IP Address)	59
Step 1: Prepare the Master for communication via an IP	59
Step 2: Prepare the panel for communication via an IP	60
Step 3: Verify and Upgrade the panel firmware via an IP	61
Firmware Pages and Descriptions	63
Setup Navigation Buttons	63
Protected Setup Page	63

ii 7" Modero Widescreen Touch Panels