3Com MSR 30, MSR 50 manual Mode, Syntax mode zone-name default-standard Undo mode

2658 CHAPTER 175: E1 AND T1 CONFIGURATION COMMANDS

After configuring a target match template with the match-templatecommand for a voice entity, you need to associate the entity with a logical interface to indicate from which interface the traffic destined for the target should be routed.

Related command: timeslot-set,entity on page 2594, and pri-set.

Example # Associate a POTS entity with a TS group on an E1 interface.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] dial-program [Sysname-voice-dial] entity 10 pots [Sysname-voice-dial-entity10] line 1/0:1

mode

Syntax mode zone-name[ default-standard ]

undo mode

View R2 CAS view

Parameter zone-name: Country or region name. The argument can one of the following values:

■argentina: Uses Argentinean R2 signaling standard.

■australia: Uses Australian R2 signaling standard.

■bengal: Uses Bengalee R2 signaling standard.

■brazil: Uses Brazilian R2 signaling standard.

■china: Uses Chinese R2 signaling standard.

■custom: Uses customized R2 signaling standard.

■hongkong: Uses Hongkong R2 signaling standard.

■india: Uses Indian R2 signaling standard.

■indonesia: Uses Indonesian R2 signaling standard.

■itu-t: Uses ITU-T R2 signaling standard.

■korea: Uses Korean R2 signaling standard.

■malaysia: Uses Malaysian R2 signaling standard.

■mexico: Uses Mexican R2 signaling standard.

■newzealand: Uses New Zealand R2 signaling standard.

■singapore: Uses Singaporean R2 signaling standard.

■thailand: Uses Thai R2 signaling standard.

default-standard: Initializes R2 signaling parameters such as values of the force-meteringcommand based on national R2 signaling variants.

Description Use the mode command to configure a national R2 signaling variant.