3Com MSR 50, MSR 30 manual Reset bridge address-table, Reset bridge traffic, 561

561

By default, bridging over a PVC is disabled. If you configure both the map bridge virtual-ethernetand map bridge-groupcommands, only the map bridge virtual-ethernettakes effect.

Example # Enable bridging over PVC 32/102.

<Sysname> system-view

[Sysname] interface atm 1/0

[Sysname-Atm1/0] pvc 32/102

[Sysname-atm-pvc-Atm1/0-32/102] map bridge-group broadcast

reset bridge address-table

Syntax reset bridge address-table[ bridge-setbridge-set dlsw interface interface-type interface-number ]

View User view

Parameters bridge-set: Clears MAC address entries of the specified bridge set. bridge-setmust be an integer in the range of 1 to 255.

dlsw: Clears MAC address entries of the DLSw module.

interface-typeinterface-number: Clears MAC address entry of the specified interface.

Description Use the reset bridge address-tablecommand to remove one or more dynamic bridge table entries.

Example # Clear all dynamic entries about bridge set 1 from the bridge table.

<Sysname> reset bridge address-table bridge-set 1

reset bridge traffic

Syntax reset bridge traffic [ bridge-setbridge-set dlsw interface interface-type interface-number ]

View User view

Parameters bridge-set: Clears traffic statistics information about the specified bridge set. bridge-setmust be an integer in the range of 1 to 255.

dlsw: Clears the traffic statistics information about the DLSw module.

interface-typeinterface-number: Clears the traffic statistics information about the specified interface.

Description Use the reset bridge traffic command to clear the statistic information about bridged traffic.