3Com MSR 50, MSR 30 manual Display dar protocol-statistic

1869

display dar protocol-statistic

Syntax	display dar protocol-statistic [ protocol protocol-nametop top-numberall ]
	[ interface interface-type interface-number ] [ direction { in out } ]
View	Any view
Parameters	protocol protocol-name: Displays specified protocol, in the same range with the
	protocol-namedefined in the if-match protocol command.
	top top-number: Displays the newest protocols of the traffic in top-number, in the
	range 1 to 16.
	all: Displays all protocol packets; it defaults not to display the statistics packets
	and the protocol packets in 0 byte.
	interface-typeinterface-number: Specifies an interface by its type and number.
	direction: Specifies the direction to display traffic. By default, it is bi-directional.
	in: Displays the traffic on the inbound direction.
	out: Displays the traffic on the outbound direction.
Description	Use the display dar protocol-statisticcommand to display DAR packet
	statistics information.

Examples # Display statistics information about all protocol packets.

<Sysname>	display dar protocol-statistic
Interface: Ethernet0/0
Port	In/Out	Packet Count	Byte Count	Bit Rate	Max Bit Rate
				in 5 min	in 5 min
				(bps)	(bps)
-------- ------		-------------	---------------	------------	-----------
ftp	IN	33	1034	23	44
	OUT	10	650	0	0
http	IN	24	948	11	20
bgp	IN	1	72	10	12
Total	IN	58	2054	44	76
	OUT	10	650	0	0
Interface: Ethernet2/0
Port	In/Out	Packet Count	Byte Count	Bit Rate	Max Bit Rate
				in 5 min	in 5 min
			(bps)	(bps)
-------- ------		-------------	---------------	------------	-----------
bgp	OUT	23	1480	110	112
Total	OUT	23	1480	110	112

Table 497 Description on the fields of the display dar protocol-statistic command

Field	Description
Port	Protocol name
In/Out	Direction in which the packet is transmitted
	(inbound/outbound)