3Com MSR 30 manual Info-center trapbuffer, Logfile save, Undo info-center trapbuffer channel size

2444 CHAPTER 163: INFORMATION CENTER CONFIGURATION COMMANDS

Use the undo info-center timestamp loghost command to restore the default.

By default, the time stamp format for log information sent to the log host is date.

Example # Set not to include the year information in the output information to the log host.

<Sysname> system-view

[Sysname] info-center timestamp loghost no-year-date

info-center trapbuffer

Syntax	info-center trapbuffer [channel { channel-number channel-name } size buffersize ]
	*
	undo info-center trapbuffer [ channel size ]
View	System view
Parameter	size buffersize: Specifies the maximum number of trap messages in a trap buffer
	in the range 0 to 1,024 with 256 as the default value.
	channel-number: Specifies a channel number, in the range 0 to 9.
	channel-name: Specifies a channel name, which could be a default name or one
	that is defined by the user. The user needs to specify a channel name first before
	using it as a self-defined channel name. For more information, refer to
	“info-center channel name” on page 2432.
Description	Use the info-center trapbuffer command to enable information output to the
	trap buffer and set the corresponding parameters.
	Use the undo info-center trapbuffer command to disable information output
	to the trap buffer.
	By default, information output to the trap buffer is enabled with channel 3
	(trapbuffer) as the default channel and a maximum buffer size of 256.
	Note that the info-center trapbuffer command takes effect only after the
	information center is enabled with the info-center enable command.
Example	# Enable system to output information to the trap buffer with a default buffer size
	of 30.
	<Sysname> system-view
	[Sysname] info-center trapbuffer size 30
logfile save

Syntax logfile save