3Com MSR 50, MSR 30 manual Link Aggregation Configuration Commands, Display lacp system-id

LINK AGGREGATION CONFIGURATION

27 COMMANDS

n Link aggregation is not supported on MSR 20 series routers. It is only supported on the interfaces of 16FSW/24FSW modules of MSR 30/MSR 50 series routers.

display lacp system-id

Syntax display lacp system-id

View Any view

Parameter None

Description Use the display lacp system-idcommand to display the local system ID (also called the actor system ID), which comprises the system LACP priority and the system MAC address.

Example # Display the local system ID.

<Sysname> display lacp system-id

Actor System ID: 0x8000, 00e0-fc00-0100

display link-aggregation interface

Syntax	display link-aggregation interface interface-type interface-number [ to interface-type
	interface-number ]
View	Any view
Parameter	interface interface-type interface-number [ to interface-type interface-number ]:
	Specifies a port range or a port if the to keyword and the second port are not
	specified.
Description	Use the display link-aggregation interface command to display detailed
	information about link aggregation for the specified port or ports.
	You may find that information about the remote system is replaced by 0 and no
	statistics about LACPDUs are provided for manual link aggregation groups. This is
	normal because this type of aggregation group has no knowledge of its partner
	and does not use LACP PDUs for maintaining link aggregation.