3Com MSR 50, MSR 30 manual Vpn-instance-capability simple, Vpn-target VPN instance view, 1719

1719

Example # Define a tunneling policy, specifying that only GRE tunnels can be used and the number of tunnels for load balancing be 2.

<Sysname> system-view [Sysname] tunnel-policy po1

[Sysname-tunnel-policy-po1] tunnel select-seq gre load-balance-number 2

vpn-instance-capability simple

Syntax vpn-instance-capability simple

undo vpn-instance-capability

View OSPF multi-instance view

Parameter None

Description Use the vpn-instance-capability simple command to enable multi-VPN-instance CE.

Use the undo vpn-instance-capabilitycommand to disable the function.

By default, the function is disabled.

Example # Enable multi-VPN-instance CE.

<Sysname> system-view

[Sysname] ospf 100 vpn-instance vpna

[Sysname-ospf-100] vpn-instance-capability simple

vpn-target (VPN instance view)

Syntax vpn-target vpn-target&<1-8> [ both export-extcommunity import-extcommunity ]

undo vpn-target { all { vpn-target&<1-8> [ both export-extcommunity import-extcommunity ] }

View VPN instance view

Parameter vpn-target&<1-8>: Adds the VPN target extended community attribute to the import or export VPN target extended community list and specify the VPN target in the format nn:nn or IP-address:nn. &<1-8> means that you can specify this argument for up to 8 times.

A VPN target attribute can be of 3 to 21 characters and in either of these two formats:

■16-bit AS number: 32-bit user-defined number. For example, 101:3.

■32-bit IP address: 16-bit user-defined number. For example, 192.168.122.15:1.