3Com MSR 50, MSR 30 manual Mpls te resv-style, Mpls te retry

1631

Use the undo mpls te reoptimization command to disable reoptimization on

	the tunnel.
	Reoptimization is disabled by default.
n The reoptimization function cannot be used together with these commands:
	mpls te auto-bandwidth adjustment, mpls te route-pinning,mpls te
	backup, and mpls te resv-style ff.
Example	# Enable reoptimization, setting the reoptimization (automatic rerouting)
	frequency to 43200 seconds (12 hours).
	<Sysname> system-view
	[Sysname] interface tunnel 0
	[Sysname-Tunnel0] mpls te reoptimization frequency 43200
mpls te resv-style
Syntax	mpls te resv-style { ff se }
	undo mpls te resv-style
View	Tunnel interface view
Parameter	ff: Sets the resource reservation style to fixed filter (FF).
	se: Sets the resource reservation style to shared explicit (SE).
Description	Use the mpls te resv-stylecommand to set the resource reservation style for the
	MPLS TE tunnel.
	Use the undo mpls te resv-stylecommand to restore the default.
	The default resource reservation style is SE.
	You may configure FF and SE only when the signaling protocol is set to RSVP-TE.
Example	# Adopt the FF reservation style when setting up the CR-LSP tunnel for TE tunnel
	0.
	<Sysname> system-view
	[Sysname] interface tunnel 0
	[Sysname-Tunnel0] mpls te resv-style ff
mpls te retry
Syntax	mpls te retry times
	undo mpls te retry