3Com MSR 50, MSR 30 Ima-standard, Ima-test link-number number pattern-id id, Undo ima-test

119

ima-standard

Syntax ima-standard { alternate-v10 normal standard-v10 standard-v11 }

undo ima-standard

View IMA group interface view

Parameter alternate-v10: Uses V1.0 (other implementation) standard.

normal: Uses V1.1 standard. An IMA group interface adopting this standard changes to adopt V1.0 (standard implementation) standard if its peer interface adopts V1.0 (standard implementation).

standard-v10: Uses V1.0 (standard implementation) standard.

standard-v11: Uses V1.1 standard.

Description Use the ima-standardcommand to set the standard to be adopted by an IMA group interface.

Use the undo ima-standardcommand to restore the default.

By default, V1.1 standard is adopted.

Example # Configure to adopt V1.1 standard.

<Sysname> system-view [Sysname] interface atm 5/0 [Sysname-Atm5/0] ima ima-group 1

[Sysname-Atm5/0] interface ima-group 5/1 [Sysname-Ima-group5/1] ima-standard standard-v11

ima-test

Syntax	ima-test [ link-number number ] [ pattern-id id ]
	undo ima-test
View	IMA group interface view
Parameter	link-numbernumber: Specifies the number of the E1/T1 link to be tested.
	pattern-idid: Specifies the test mode, a hexadecimal number in the range 0x00
	to 0xFE.
Description	Use the ima-testcommand to specify the E1/T1 link to be tested and the test
	mode for IMA group interface test.
	Use the undo ima-testcommand to cancel the test.