3Com MSR 30, MSR 50 manual Dns server ipv6, Ipv6, Syntax ipv6, Undo ipv6

844CHAPTER 65: IPV6 BASICS CONFIGURATION COMMANDS

Table 182 Description on fields of the display udp ipv6 statistics command

Field	Description
shorter than header	Total number of UDP packets whose total length is less
	than specified by the packet header
data length larger than packet	Total number of packets whose data length exceeds
	that specified by the packet header
unicast(no socket on port)	Total number of unicast packets without any socket
	received on a port
broadcast/multicast(no socket on	Total number of broadcast/multicast packets without
port)	any socket received on a port
not delivered, input socket full	Number of packets not handled because of the receive
	buffer being full
input packet missing pcb cache	Number of packets failing to match the PCB cache

dns server ipv6

Syntax dns server ipv6 ipv6-address [ interface-type interface-number ]

undo dns server ipv6 ipv6-address [ interface-type interface-number ]

View System view

Parameter ipv6-address: IPv6 address of a DNS server.

interface-typeinterface-number: Specifies an interface. When the IPv6 address of the DNS server is a link-local address, this argument must be specified.

Description Use the dns server ipv6 command to configure an IPv6 address for a DNS server.

Use the undo dns server ipv6 command to remove the configured DNS server.

By default, no DNS server is configured.

Example # Configure the IPv6 address 2002::1 for a DNS server.

<Sysname> system-view

[Sysname] dns server ipv6 2002::1

ipv6

Syntax ipv6

undo ipv6

View System view

Parameter None