3Com MSR 30, MSR 50 manual Gk-id, Gk-security call enable, Undo gk-id

2694 CHAPTER 177: H.323 CONFIGURATION COMMANDS

[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1

[Sysname-voice-gk] gk-2nd-id gk-backup gk-addr 1.1.1.2

gk-id

Syntax gk-idgk-name gk-addrgk-ipaddress [ ras-port ]

undo gk-id

View Gatekeeper client view

Parameter gk-name: Gatekeeper name, a string of 1 to 128 case sensitive characters.

gk-ipaddress: IP address of gatekeeper.

ras-port: RAS port used by the gatekeeper, an integer in the range 1 to 65535. The default is 1719.

Description Use the gk-idcommand to configure the primary gatekeeper for the gateway.

Use the undo gk-idcommand to remove the primary gatekeeper.

By default, no primary gatekeeper is specified for the gateway.

Only after you configure the information of the primary gatekeeper can the gateway locate the gatekeeper for registration.

Related command: area-id,gw-id,gk-2nd-id,gw-address,ras-on.

Example # Configure the primary server, setting its IP address to 1.1.1.1, name to gk-center, and RAS port to the default.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] gk-client

[Sysname-voice-gk] gk-id gk-center gk-addr 1.1.1.1

gk-security call enable

Syntax gk-security call enable

undo gk-security call enable

View Gatekeeper client view

Parameter None

Description Use the gk-security call enable command to enable security calling on the voice gateway.