3Com MSR 50 Ipv6-family, Network IPv6 address family view, Syntax ipv6-family Undo ipv6-family

1241

med-value: Applies the MED value to redistributed routes. The value is in the range 0 to 4294967295. If not specified, the cost of the redistributed route is used as its MED in the IPv6 BGP routing domain.

route-policy-name: Name of a routing policy used to filter redistributed routes, a string of 1 to 19 characters.

Description Use the import-routecommand to redistribute routes from another routing protocol.

Use the undo import-routecommand to remove the configuration.

By default, IPv6 BGP does not redistribute routes from any routing protocol.

The routes redistributed using the import-routecommand has the incomplete origin attribute.

Examples # Redistribute routes from RIPng 1.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] import-route ripng 1

ipv6-family

Syntax ipv6-family

undo ipv6-family

View BGP view

Parameters None

Description Use the ipv6-familycommand to enter IPv6 address family view.

Use the undo ipv6-familycommand to remove all configurations from the view.

IPv4 BGP unicast view is the default.

Examples # Enter IPv6 address family view.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

network (IPv6 address family view)

Syntax network ipv6-address prefix-length [ short-cutroute-policyroute-policy-name ] undo network ipv6-address prefix-length [ short-cut]