3Com MSR 50, MSR 30 manual Display ip routing-table protocol, 939

939

Protocol:	Direct	Process ID:	0
Preference:	0	Cost:	0
NextHop:	2.2.2.1	Interface: Vlan2
RelyNextHop:	0.0.0.0	Neighbour: 0.0.0.0
Tunnel ID:	0x0	Label: NULL
State:	Active Adv	Age: 00h20m52s
Tag:	0
Destination: 2.2.2.1/32
Protocol: Direct		Process ID:	0
Preference:	0	Cost:	0
NextHop:	127.0.0.1	Interface: InLoop0
RelyNextHop:	0.0.0.0	Neighbour: 0.0.0.0
Tunnel ID:	0x0	Label: NULL
State:	Active NoAdv	Age: 00h20m52s
Tag:	0

For detailed description of the above output, see Table 204.

display ip routing-table protocol

Syntax display ip routing-table protocol protocol [ inactive verbose ]

View Any view

Parameters protocol: Displays the routes of a routing protocol, not including routes redistributed into the protocol. It can be bgp, direct, isis, ospf, rip, or static.

inactive: Displays only inactive routes. With this argument absent, the command displays information about both active and inactive routes.

verbose: Displays detailed routing information. With this argument absent, the command displays brief routing information.

Description Use the display ip routing-table protocol command to display routing information of a specified routing protocol.

Examples # Display brief information about direct routes.

<Sysname> display ip routing-table protocol direct Public Routing Table : Direct

Summary Count : 6

Direct Routing table Status : < Active>

Summary Count : 6

Destination/Mask	Proto	Pre	Cost	NextHop	Interface
2.2.2.0/24	Direct	0	0	2.2.2.1	Vlan2
2.2.2.2/32	Direct	0	0	127.0.0.1	InLoop0
127.0.0.0/8	Direct	0	0	127.0.0.1	InLoop0
127.0.0.1/32	Direct 0		0	127.0.0.1	InLoop0
192.168.80.0/24	Direct	0	0	192.168.80.10	Eth1/0
192.168.80.10/32	Direct	0	0	127.0.0.1	InLoop0