3Com MSR 30, MSR 50 manual Lacp port-priority

478CHAPTER 27: LINK AGGREGATION CONFIGURATION COMMANDS

Table 75 Description on the fields of display link-aggregation verbose

Field	Description
Flags	One-octet LACP flags field indicates the actor state variables for the
	port. From the least to the most significant bit, they are represented
	by A through H as follows:
	■ A indicates the enabling/disabling state of LACP, 1 for enabled
	and 0 for disabled
	■ B indicates the timeout control value, 1 for short timeout, and 0
	for long timeout
	■ C indicates whether the sending system considers this link to be
	aggregatable, 1 for true, and 0 for false
	■ D indicates whether the sending system considers that this link is
	synchronized, 1 for true, and 0 for false
	■ E indicates whether the sending system considers that collection
	of incoming frames is enabled on the link, 1 for true and 0 for
	false
	■ F indicates whether the sending system considers that
	distribution of outgoing frames is enabled on the link, 1 for true
	and 0 for false
	■ G indicates whether the receive state machine of the sending
	system is using default operational partner information, 1 for
	true and 0 for false
	■ H indicates whether the receive state machine of the sending
	system is in the expired state, 1 for true and 0 for false
	If a flag bit is set to 1, the corresponding English letter that
	otherwise is not output displays.

Aggregation ID

AggregationType

Aggregation

Description

System ID

Port State

Local:

Port, Status, Priority, Oper-key, Flag

Remote:

Actor, Partner, Priority,

Oper-key, SystemID,

Flag

Link aggregation group ID

Link aggregation type: manual LACP or static LACP

Link aggregation group name

Local system ID

Port state in a link aggregation group: selected or unselected

Other information about the local end, including member ports, port state, port LACP priority, operational key, and flags

Detailed information about the remote end, including corresponding local port, port ID, port LACP priority, operational key, system ID, and flags

lacp port-priority

Syntax lacp port-priority port-priority

undo lacp port-priority

View Ethernet interface view

Parameter port-priority: Port LACP priority, in the range 0 to 65535.