3Com MSR 50, MSR 30 Description on the fields of the display interface command, 423, Lapb DCE

423

0	broadcasts, 0 multicasts
3	errors, 0 runts, 0 giants
0	CRC, 3 align errors, 0 overruns
0	dribbles, 0 aborts, 0 no buffers
0	frame errors
Output:210 packets, 4720 bytes
0	errors, 0 underruns, 0 collisions
0	deferred
DCD=UP DTR=UP DSR=UP RTS=UP CTS=UP
Table 55 Description on the fields of the display interface command
Field		Description
Link-protocol is X.25 DCE Ietf		Current encapsulation protocol of this interface is X.25
		protocol that works in DCE mode, and the data packet
		encapsulation format is IETF.
address is		X.121 address of this X.25 interface; this field will be empty
		if there is no address.
state		Current status of this X.25 interface.
modulo		Data packets and traffic control packets sent by this X.25
		interface are numbered in modulo 8 mode.
window sizes input:2 output:2,		Flow control parameters of this X.25 interface, including
packet sizes input:128		receiving window size, sending window size, maximum
output:128		received packet size (in bytes), and maximum sent packet
		size (in bytes).

Channels: Incoming-only 0-0, Two-way 1-1024, Outgoing-only 0-0

Channel range division of this X.25 interface, sequentially as incoming-only channel section, two-way channel section, outgoing-only channel section; if both demarcating values of an section are 0, this section is disabled.

Timers: T20 180, T21 200, T22	Delay values of various timers of this X.25 interface, in
180, T23 180, T28 300,	seconds
Idle_Timer 0 <seconds>
New Configuration:	New configuration of this X.25 interface taking effect after
	next restart; if this configuration is wrong, the default value
	will be restored
Restarts 0 (Restart Collisions 0)	Statistics of this X.25 interface, including times of restart
	(including restart collision)
Refused Incoming Call	Statistics information of this X.25 interface: times of call
	refusals
Failing Outgoing Call	Statistics information of this X.25 interface: Number of
	failed outgoing calls.
input/output: RESTART 1/1 ...	Statistics information of this X.25 interface: quantities of
REJ 0/0	received and sent packets, format: received quantity/sent
	quantity.
Invalid Pr	Error statistics information of this X.25 interface: total of
	received data packets and traffic control packets carrying
	erroneous acknowledgement numbers.
Invalid Ps	Error statistics information of this X.25 interface: total of
	received data packets carrying erroneous sequence
	numbers.
Unknown	Error statistics information of this X.25 interface: total of
	received irresolvable packets.
Link-protocol is LAPB	Current encapsulation protocol of this interface is LAPB
	protocol.
LAPB DCE:	LAPB of this interface works in DCE mode.
module 8	Information frame and monitoring frame sent by this
	interface LAPB are numbered in the modulo 8 view.