3Com MSR 30, MSR 50 manual Crl url, Display pki certificate, Undo crl url

2050 CHAPTER 134: PKI CONFIGURATION COMMANDS

Example # Set the CRL update period to 20 hours.

<Sysname> system-view [Sysname] pki domain 1

[Sysname-pki-domain-1] crl update-period 20

crl url

Syntax	crl url url-string
	undo crl url
View	PKI domain view
Parameter	url-string: URL of the CRL distribution point, a case-insensitive string of 1 to 127
	characters in the format of ldap: //server_location, where server_location is
	generally expressed by IP address.
Description	Use the crl url command to specify the URL of the CRL distribution point.
	Use the undo crl url command to remove the configuration.
	By default, no CRL distribution point URL is specified.
	Note that when the URL of the CRL distribution point is not set, you should
	acquire CA certificate and a local certificate, and then acquire a CRL through SCEP.
Example	# Specify the URL of the CRL distribution point.
	<Sysname> system-view
	[Sysname] pki domain 1
	[Sysname-pki-domain-1] crl url ldap://169.254.0 30

display pki certificate

Syntax	display pki certificate { { ca local } domain domain-namerequest-status }
View	Any view
Parameter	ca: Displays the CA certificate.
	local: Displays the local certificate.
	domain-name: Name of the PKI domain, a string of 1 to 15 characters.
	request-status: Displays the status of a certificate request.
Description	Use the display pki certificate command to display the contents of a certificate
	or the status of certificate request.