3Com MSR 30, MSR 50 manual Ospf timer poll, Ospf timer retransmit

1150 CHAPTER 76: OSPF CONFIGURATION COMMANDS

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] ospf timer hello 20

ospf timer poll

Syntax ospf timer poll seconds

undo ospf timer poll

View Interface view

Parameters seconds: Poll interval in seconds, in the range 1 to 2147483647.

Description Use the ospf timer poll command to set the poll interval on an NBMA interface.

Use the undo ospf timer poll command to restore the default value.

By default, the poll interval is 120 seconds.

When an NBMA interface finds its neighbor is dead, it will send hello packets at the poll interval.

Note that:

■The poll interval is at least four times the hello interval.

■This configuration is not supported on the NULL interface.

Related commands: ospf timer hello.

Examples # Set the poll timer interval on the current interface to 130 seconds.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] ospf timer poll 130

ospf timer retransmit

Syntax ospf timer retransmit interval

undo ospf timer retransmit

View Interface view

Parameters interval: LSA retransmit timer interval in seconds, in the range 1 to 3600.

Description Use the ospf timer retransmit command to set the LSA retransmit interval on an interface.