3Com MSR 30 Vqa dscp, Cs7, or ef, Dscp values, Keyword Dscp value in binary Dscp value in decimal

2622 CHAPTER 173: VOIP CONFIGURATION COMMANDS

Description Use the voip timer command to set the duration for switching from a VoIP entity to a backup POTS entity after a VoIP call failure.

Use the undo voip timer command to restore the default.

By default, the duration for switching from a VoIP entity to a backup POTS entity after a call failure is 5 seconds.

Example # Configure the duration for switching from a VoIP entity to a backup POTS entity after a call failure to 3 seconds.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] voip timer voip-to-pots 3

vqa dscp

Syntax vqa dscp { media signal } dscp-value

	undo vqa dscp { media signal }
View	Voice view
Parameter	media: Global DSCP value in the ToS field of the IP packets that carry RTP streams.
	signal: Global DSCP value in the ToS field of the IP packets that carry voice
	signaling.
	dscp-value: DSCP value in the range 0 to 63 or the keyword af11, af12, af13,
	af21, af22, af23, af31, af32, af33, af41, af42, af43, cs1, cs2, cs3, cs4, cs5, cs6,
	cs7, or ef.
	Table 684	DSCP values
	Keyword	DSCP value in binary	DSCP value in decimal
	af11	001010	10
	af12	001100	12
	af13	001110	14
	af21	010010	18
	af22	010100	20
	af23	010110	22
	af31	011010	26
	af32	011100	28
	af33	011110	30
	af41	100010	34
	af42	100100	36
	af43	100110	38
	cs1	001000	8
	cs2	010000	16