3Com MSR 30, MSR 50 manual SNP packet length mismatch

1094 CHAPTER 75: IS-IS DEBUGGING COMMANDS

Table 247 Description on the fields of the debugging isis datalink-receiving-packet command

Field	Description
Circuit NOT operationally ON	Interface is not ready for operation.
SYS not functional. Ignoring recvd packet	System is not functioning and therefore
	ignores the received packets.

Rxed IS-IS PDU on Circuit circuitName, PDU’s type is packetType

An IS-IS PDU was received on the interface.

circuitName: Interface name

packetType: Interface type.

Table 248 Description on the fields of the debugging isis datalink-sending-packet command

Field	Description
Sending IS-IS PDU on Circuit circuitName	Sending IS-IS PDU through the interface.
	circuitName: Interface name
Socket Send PDU error	An error occurred when the socket was
	sending a PDU.
Socket Send PDU success	Socket sent a PDU successfully.
Sending IS-IS PDU Failure	Socket failed to send a PDU.

Table 249 Description on the fields of the debugging isis general-error command

Field	Description
UPDT: PDU length mismatch in SNP: RecLen =	SNP packet length mismatch
%d, EncodeLen = %d.
RECV: PDU length mismatch in Hello PDU :	Hello packet length mismatch
RecLen = %d, EncodeLen = %d
PROT-ERR: Wrong P2P IIH Hdr Length, %d. It	Wrong P2P Hello packet header length
should be %d
PROT-ERR: Wrong LAN IIH Hdr Length, %d. It	Wrong LAN Hello packet header length
should be %d
PROT-ERR: Wrong L1/2CSNP Hdr Length, %d.	Wrong L1/2 CSNP packet header length
It should be %d
PROT-ERR: Wrong L1/2 PSNP Hdr Length, %d.	Wrong L1/2 PSNP packet header length
It should be %d
PROT_ERR: Wrong L1/2 LSP Hdr Length, %d.	Wrong L1/2 LSP packet header length
It should be %d

Table 250 Description on the fields of the debugging isis graceful-restart command

Field Description

RST: levelType T1 Timer Started on circName,

Counter: count

RST: Notifying RM that the Process is Entering Restart.

RST: Notifying RM that the Process is Leaving Restart (Due to Rst Disable).

GR timer started.

levelType: system type, which can be L1 or L2.

count: Number of times GR timer has started.

circName: Interface name

Notifying RM that the process is entering the GR state.

Notifying RM that the process is leaving the GR state because GR is disabled.