Specifications, Optical, Electrical, Terminals | BenQ W5000, W20000

W20000-en.book Page 49 Monday, October 22, 2007 3:35 PM

Specifications

All specifications are subject to change without notice.

English

Optical

Projection system DMD chip Lens

Projection screen size Lamp

Single-chip DLPTM system. 0.95" DLP (1920 x 1080)

F=2.4 to 2.7, f=38.87 to 46.63 mm 41" to 300"

200W

Electrical

Compatibility	PC: 640 x 400 to 1920 x 1080 (16:9)
	Video: NTSC, PAL, SECAM, YPbPr NTSC(480i)/480p/PAL(576i)/576p,
	HDTV (720p/1080i)
	DDC 2B
Color Space	Color Gamut > 55% NTSC
Terminals
Input	Analog RGB: BNC x 5
	HDMI (V. 1.2) x 2
	Component Video (Y/ CB/ CR, Y/ PB/ PR) x 1
	Component Video (Y/ CB/ CR, Y/ PB/ PR) x 1 (shared with BNC)
	Composite Video x 1
	S-Video x 1
Output	12VDC (Max. 0.5 A)
Control	Serial Connector: RS232 8 pin MINI DIN
General characteristics
Projector weight	9.6 kg (21.2 lbs)
Power	VAC 100-240V, 3.2A, 50-60Hz (Automatic)
Power consumption	Max. 340W
Operating temperature	0 °C to 35 °C at sea level
Operating humidity	10% - 90% (without condensation)
Operating altitude	0-1499 m at 0°C-35°C
	1500-3000 m at 23°C-30°C (with High Altitude Mode on)
Storage temperature	-20°C- 60°C/-4°F to 140°F
Storage humidity	10% - 90%

Dimensions

492 x 180 x 420 mm (W x H x D)

	492
420	180

Unit: mm

Additional information

49

Image 49

BenQ W5000, W20000 user manual Specifications, Optical, Electrical, Terminals, Dimensions

Contents

W20000/W5000 Digital Projector Home Cinema Series Welcome Table of contents Important safety instructions During operation. It may harm your sight Do not block the ventilation holes whileDo not step on the projector or place any objects upon it Avoid volatile liquid Moisture condensationDisposal Ceiling mounting the projector Remote control batteries Shipping contentsRemote control operation Overview Projector features Projector exterior view Connector panelFront and upper side view Rear view Control panel Controls and functions Remote control Choosing a location Positioning your projector Shifting the projection lens vertically Obtaining a preferred projected image size Determine the aspect ratio of your screen, 169 or 43? Installation for a 169 ratio screen Projection dimensionsWidescreen ratio screen dimension table With min Position Zoom Cm C Cm D Min Max Highest Lowest Image Installation for a 43 ratio screenDiagonal Preparations Connecting with video equipmentBest video quality Better video quality Connecting Rgbhv devices Connecting Hdmi devicesConnecting component-video devices Connecting a computer Connecting S-Video or video devicesConnect the projector to a computer with a VGA-BNC cable Using the remote control or projector Using the projectorUsing the OSD menu Turning the projector on Fine-tuning the image size and clarity Using the menusUse / to highlight the System Setup menu Adjust the projected picture to the size that you Utilizing the password function Using a security cable lockSetting a password If you forget the password Changing the password Entering the password recall procedureDisabling the password function Confirm the new password by re-entering the new password Adjusting the projection angle Adjusting the projected imageCorrecting picture distortion Two parallel sides Selecting a preset mode Using the preset and user modesFine-tuning the selected picture mode Using the remote control Resetting the picture mode Setting the User 1/User 2/User 3 modeRenaming user modes Enter and Exit Fine-tuning the picture quality Selecting a color temperature Setting Black LevelAdvanced picture quality controls Controlling image clarity To set a preferred color temperature Setting a preferred color temperatureTo adjust and store the settings Color Management Selecting a Gamma setting Adjusting Brilliant ColorAdjusting contrast ratio via Iris Using the remote control Selecting the aspect ratio Their original width using this settingAbout the aspect ratio To activate High Altitude Mode Using Panamorph lenses optionalOperating in a high altitude environment Suitable for use with PC and Rgbhd source inputs Displaying more than one image source simultaneously Disabled functions for the active windowsPIP source conflict list Highlight PIP and press / to select On Personalizing the projector menu display Creating your own startup screenLocking control keys Commands during the cooling process Turning the power off On-Screen Display OSD structure On-Screen Display OSD menus Setup System SetupInformation Picture -- Advanced menu Picture -- Basic menu Display menu System Setup menu Advanced Setup menu Information menu ResolutionSource Lamp Hours Care of the projector Additional information Resetting the filter timer To clean the filter Lamp information Setting Auto OffGetting to know the lamp hour Extending lamp life Replacing the lamp Timing of replacing the lamp Pulling it too quickly may cause the lamp to Tighten the screws securing the lamp box After the startup logo, press Menu and then press / until Resetting the lamp timer Indicators Troubleshooting Dimensions SpecificationsOptical Electrical Format Resolution Refresh rateHz Freq.KHz Pixel Freq.MHz Timing chart Supported timing for Video and S-Video inputs Supported timing for Hdmi input Warranty Warranty and Copyright informationCopyright Disclaimer FCC statement for United States users Regulation statementsEEC statement for European users MIC statement