BenQ W5000, W20000 Adjusting Brilliant Color, Selecting a Gamma setting, Using the remote control

W20000-en.book Page 29 Monday, October 22, 2007 3:35 PM

Adjusting Brilliant Color

This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing truer, more vibrant colors in picture. When set to "Off", Brilliant Color is disabled.

Selecting a Gamma setting

Highlight Gamma Selection and select a preferred setting by pressing / on the projector or remote control.

Gamma refers to the relationship between input source and picture brightness.

•Gamma 2.2

Increases the average brightness of the picture. Best for a lit environment, meeting room or family room.

•Gamma 2.4/2.5

Best for viewing movies in a darken environment.

•Gamma 2.6/2.8

Best for viewing movies which are mostly composed of dark scenes.

High Brightness	Low Brightness
Low Contrast	High Contrast

Picture -- Advanced

Black Level	0 IRE
Clarity Control
Color Temperature	Normal
Color Temperature User_ Fine
Gamma Selection	2.4
Brilliant Color	On
Color Management
Dynamic Black	On
IRIS	0
Lens Shift
S-Video	EXIT Back

Picture -- Advanced

Black Level	0 IRE
Clarity Control
Color Temperature	Normal
Color Temperature User_ Fine
Gamma Selection	2.4
Brilliant Color	On
Color Management
Dynamic Black	On
IRIS	0
Lens Shift
S-Video	EXIT Back

English

2.2 2.4 2.5 2.6 2.8

Adjusting contrast ratio via IRIS

The contrast ratio is the measurement of the difference between the brightest whites and the darkest blacks a display can show. This projector has a very high contrast ratio which can reveal subtle color detail not possible with projectors which have a lower contrast ratio. You can adjust the contrast level to allow for ambient lighting levels within the room which may affect color detail. Make sure Dynamic Black in the Picture -- Advanced menu is set to "On" before you can adjust the contrast ratio.

To manually adjust the contrast ratio,

•Using the remote control

1.Press IRIS. The adjustment bar displays.

2.Press to lower the contrast and increase brightness, or press to raise the contrast and decrease brightness.

•Using the OSD menu

1.Press MENU and then press / until the Picture -- Advanced menu is highlighted.

2.Press to highlight IRIS.

3.Press to lower the contrast and increase brightness, or press to raise the contrast and decrease brightness.

Picture -- Advanced

Black Level	0 IRE
Clarity Control
Color Temperature	Normal
Color Temperature User_ Fine
Gamma Selection	2.4
Brilliant Color	On
Color Management
Dynamic Black	On
IRIS	0
Lens Shift
S-Video	EXIT Back

Picture -- Advanced

Black Level		0 IRE
Clarity Control
Color Temperature		Normal
Color Temperature User_ Fine
Gamma Selection	2.4
Brilliant Color		On
Color Management
Dynamic Black		On
IRIS	+ 8
Lens Shift
S-Video		EXIT Back

Using the projector 29