BenQ W5000, W20000 user manual Picture -- Basic menu, Picture -- Advanced menu

W20000-en.book Page 37 Monday, October 22, 2007 3:35 PM

Picture -- Basic menu

FUNCTION	DESCRIPTION
(default setting/value)
Picture Mode	Pre-defined picture modes are provided so you can optimize your projector
	picture set-up to suit your program type. See "Selecting a preset mode" on
(Cinema)
	page 24 for details.
Load Settings From	Selects a picture mode that most suits your need for the picture quality and
	further fine-tune the picture based on the selections listed below. See "Setting the
	User 1/User 2/User 3 mode" on page 25 for details.
Brightness	Adjusts the brightness of the picture. See "Adjusting Brightness" on page 26 for
(depends on the selected	details.
input source)
Contrast	Adjusts the degree of difference between dark and light in the picture. See
(depends on the selected	"Adjusting Contrast" on page 26 for details.
input source)
Color	Adjusts the color saturation level -- the amount of each color in a video picture.
(depends on the selected	See "Adjusting Color" on page 26 for details.
input source)
Tint	Adjusts the red and green color tones of the picture. See "Adjusting Tint" on
(depends on the selected	page 26 for details.
input source)
Sharpness	Adjusts the picture to make it look sharper or softer. See "Adjusting Sharpness"
(depends on the selected	on page 26 for details.
input source)
Reset Picture	Returns all settings in the Picture -- Basic and Picture -- Advanced menus to the
Settings	factory preset values. See "Resetting the picture mode" on page 25 for details.
Rename User Mode	Renames User 1, User 2, or User 3. See "Renaming user modes" on page 25 for
	details.

Picture -- Advanced menu

FUNCTION	DESCRIPTION
(default setting / value)
Black Level	Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black Level" on page 27
(0 IRE)	for details.
Clarity Control	Adjusts the picture clarity. See "Controlling image clarity" on page 27 for details.
Color Temperature	There are several color temperature settings available. See "Selecting a color
(depends on the selected	temperature*" on page 27 for details.
Picture Mode)
Color Temperature	See "Setting a preferred color temperature" on page 28 for details.
User_ Fine Tuning
Gamma Selection	See "Selecting a Gamma setting" on page 29 for details.
(depends on the selected
Picture Mode)
Brilliant Color	See "Adjusting Brilliant Color" on page 29 for details.
(On)
Color Management	See "Color Management" on page 28 for details.
Dynamic Black	See "Adjusting contrast ratio via IRIS" on page 29 for details.
(On)
	Using the projector 37

English