BenQ W5000, W20000 user manual Advanced Setup menu

W20000-en.book Page 39 Monday, October 22, 2007 3:35 PM

	Menu Display Time (15 sec)
Menu Settings	Sets the length of time the OSD will remain active after your last key press. The
	range is from 5 to 30 seconds in 5-second increments.
	Menu Position (Center)
	Sets the On-Screen Display (OSD) menu position.
Input Source	Selects an input source to be projected. See "Selecting an input source" on page 19
	for details.
Auto Source Search	Sets whether the projector searches automatically for input sources. If the source
(Off)	scan is On, the projector will scan for input sources until it acquires a signal. If the
	function is not activated, the projector selects the last used input source.

Advanced Setup menu

FUNCTION	DESCRIPTION
(default setting / value)
	Lamp Power (Normal)
	Selects the projector lamp between Normal and Whisper modes.
	Lamp Hours
Lamp	Shows the lamp hours information. See "Getting to know the lamp hour" on
	page 43 for details.
	Reset Lamp Timer
	Once the lamp is renewed, select Reset to return the lamp timer to '0'. See
	"Resetting the lamp timer" on page 46 for details.
	Grid
	Press ENTER to display the grid test pattern. It helps you adjust the image size and
Pattern	focus and check that the projected image is free of distortion.
	Color Bar
	Press ENTER to display the color bar test pattern. You can display this test pattern
	to check that the colors are to your liking.
	Dust Filter Hours
Dust Filter	Shows the dust filter hours information
	Reset Dust Filter Timer
	Resets the duster filter timer to '0'. See "To clean the filter" on page 42 for details.
High Altitude Mode	A mode for operation in areas like high altitude or high temperature. See
(Off)	"Operating in a high altitude environment" on page 31 for details.
	Password (Off)
	Limits use of the projector to only those who know the correct password. See
Password	"Utilizing the password function" on page 21 for details.
	Change Password
	You will be asked to enter the current password before changing to a new one. See
	"Utilizing the password function" on page 21 for details.
Key Lock	Locks the keys on the projector and remote control except POWER and EXIT. See
	"Locking control keys" on page 33 for details.
	Returns all settings to the factory preset values.
Reset All Settings	The following settings will still remain: Names of user modes, Keystone,
	Position, H.Size, Phase, Language, Projector Position, High Altitude
	Mode, Lamp, and Password.

Using the projector 39

English