3Com MSR 30 manual Display dsl version, Syntax display dsl version interface atm interface-number

136CHAPTER 5: G.SHDSL INTERFACE CONFIGURATION COMMANDS

Table 2 Description on the fields of the display dsl status command

Field	Description
Rmt Provider Code	Remote code of the chip provider
Rmt Vendor Data	Remote code of the chip vendor

display dsl version

Syntax display dsl version interface atm interface-number

View Any view

Parameter interface-number: Specifies a G.SHDSL interface to view the version and support capability information about it.

Description Use the display dsl version command to display the version and support capability information about the specified G.SHDSL interface.

Example # Display the G.SHDSL version of G.SHDSL interface ATM 5/0.

<Sysname> display dsl version interface atm 5/0

Dsl Line Type:	G.SHDSL
ATM SAR Device:	0x823614f1
ATM SAR Revision:	0x02
Chipset Vendor:	GSPN
Firmware Rel-Rev:	R2.3.1-0
DSP Version:	1
PCB Version:	0.0
CPLD Version:	0.0
Driver Version:	2.0
Hardware Version:	1.0
ITU G991.2 ANNEX A:	Supported
ITU G991.2 ANNEX B:	Supported

Table 3 Description on the fields of the display dsl version interface atm command

Field	Description
Dsl line Type	Type of the user access line
ATM SAR Device	Identifier of the SAR chip
ATM SAR Revision	Revision identifier of the SAR chip
Chipset Vendor	Identifier of the DSL chipset vendor
Firmware Rel-Rev	Identifier and version of the firmware
DSP Version	--
PCB Version	--
CPLD Version	Logic version
Driver Version	Driver software version
Hardware Version	--
ITU G991.2 ANNEX A, ITU	Standards and the annexes supported by the interface
G991.2 ANNEX B