1846 CHAPTER 120: PORT PRIORITY TRUST MODE CONFIGURATION COMMANDS

Description Use the qos trust command to set to trust 802.1p priority carried with a packet.

Use the undo qos trust command to restore the default.

By default, 802.1p priority carried with a packet is not trusted.

Port group is supported if the number of the interfaces on a layer 2 module is 16, 24 or 48.

Execute the command in interface view, and the setting is valid on the current interface only. Execute the command in interface group view, and the setting is valid on all interfaces in the interface group.

Examples # Configure the priority trust mode on the port Ethernet 1/0 to be 802.1p priority carried with the trust packet.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] qos trust dot1p

Page 1846
Image 1846
3Com MSR 30, MSR 50 manual Port Priority Trust Mode Configuration Commands