3Com MSR 50, MSR 30 Interface bridge-template, Related command display fr map-infoon, Parameters

559

broadcast: Specifies to allow bridging of broadcasts over this FR-to-bridging mapping.

Description Use the fr map bridge command to create an FR-to-bridging mapping on the specified virtual circuit.

Use the undo fr map bridge command to remove an FR-to-bridging mapping.

By default, no FR-to-bridging mappings exist.

Related command: display fr map-infoon page 376.

Example # Create an FR-to-bridging mapping on the virtual circuit by the DLCI of 50 on Serial2/0.

<Sysname> system-view [Sysname] interface serial 2/0 [Sysname-Serial2/0] link-protocol fr

[Sysname-Serial2/0] fr interface-type dce

[Sysname-Serial2/0] fr dlci 50

[Sysname-Serial2/0] bridge-set 1

[Sysname-Serial2/0] fr map bridge 50 broadcast

interface bridge-template

Syntax	interface bridge-template bridge-set
	undo interface bridge-template bridge-set
View	System view
Parameters	bridge-set: Bridge set number, an integer in the range of 1 to 255.
Description	Use the interface bridge-templatecommand to create a bridge-template
	interface for a bridge set.
	Use the undo interface bridge-template command to remove a
	bridge-template interface.
	A bridge set can have only one bridge-template interface.
Related command:	bridge routing-enable.
Example	# Create a bridge-template interface for bridge set 1.
	<Sysname> system-view
	[Sysname] interface bridge-template 1
	[Sysname-Bridge-template1]