3Com MSR 50, MSR 30 Display vlan, Related command vlan, Example # Display Vlan 2 information, 633

633

display vlan

Syntax display vlan [ vlan-id1 [ to vlan-id2 ] all dynamic interface interface-type interface-number.subnumber reserved static]

View Any view

Parameter vlan-id1: Displays the information of a VLAN specified by VLAN ID in the range of 1 to 4,094.

vlan-id1to vlan-id2: Displays the information of a range of VLANs specified by a VLAN ID range.

all: Displays all current VLAN information except for the reserved VLAN.

dynamic: Displays the information of dynamically VLANs

interface interface-type interface-number.subnumber: Displays VLAN information on a specified sub-interface. The interface-type interface-number.subnumber parameters specify the interface type and interface number, in which interface-number is the main interface number whereas subnumber is the sub-interface number, ranging from 1 to 4,094.

reserved: Displays information of the reserved VLANs. Protocol modules determine reserved VLANs according to function implementation, and reserved VLANs serve protocol modules. Reserved VLANs cannot be modified.

static: Displays static VLAN information.

Description Use the display vlan command to display VLAN information.

Related command: vlan.

Example # Display VLAN 2 information.

<Sysname> display vlan 2 VLAN ID: 2

VLAN Type: static

Route interface: not configured

Description: VLAN 0002

Broadcast MAX-ratio: 100%

Tagged Ports: none

Untagged Ports:

Ethernet1/1 Ethernet1/2 Ethernet1/3

# Display VLAN 3 information.

<Sysname> display vlan 3 VLAN ID: 3

VLAN Type: static

Route Interface: configured

IP Address: 1.1.1.1

Subnet Mask: 255.255.255.0