3Com MSR 50 Display dhcp relay security, Groups correlated to an interface or all interfaces

737

Example # Configure Ethernet 1/0 to support authorized ARP.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] dhcp update arp

display dhcp relay

Syntax	display dhcp relay { all interface interface-typeinterface-number}
View	Any view
Parameter	all: Displays information of DHCP server groups that all interfaces correspond to.
	interface interface-typeinterface-number: Displays information of the DHCP
	server group that a specified interface corresponds to.
Description	Use the display dhcp relay command to display information about DHCP server
	groups correlated to an interface or all interfaces.
Example	# Display information about DHCP server groups correlated to all interfaces.
	[Sysname] display dhcp relay all
	Interface name	Server-group
	Ethernet1/1	2
	Table 131 Description on fields of the display dhcp relay all command
	Field	Description
	Interface name	Interface name
	Server-group	DHCP server group number correlated to the interface.

display dhcp relay security

Syntax display dhcp relay security [ ip-addressdynamic static ]

View Any view

Parameter ip-address: Displays the binding information of an IP address.

dynamic: Displays information about dynamic bindings.

static: Displays information about static bindings.

Description Use the display dhcp relay security command to display information about bindings of DHCP relay agents. If no parameter is specified, information about all bindings will be displayed.

Example # Display information about all bindings.