3Com MSR 50, MSR 30 Display ospf peer statistics, # Display brief Ospf neighbor information, 1125

1125

Table 271 Description on the fields of the display ospf peer verbose command

Field		Description
State		Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
		Loading or Full
Mode		Neighbor mode for DD exchange: Master or Slave
Priority		Router priority
DR		The DR on the interface’s network segment
BDR		The BDR on the interface’s network segment
MTU		Interface MTU
Dead timer due in 33 sec		Dead timer times out in 33 seconds
Neighbor is up for		The neighbor has been up for 93:12:38
93:12:38
Authentication Sequence		Authentication sequence number
Neighbor state change		Counts of neighbor state changes
count
# Display brief OSPF neighbor information.
<Sysname> display ospf peer
	OSPF Process 1 with Router ID 1.1.1.1
			Neighbor Brief Information
Area: 0.0.0.0
Router ID	Address		Pri	Dead-Time Interface		State
1.1.1.2	1.1.1.2		1	40	Eth0/1/0	Full/DR
Table 272 Description on the fields of the display ospf peer command
Field			Description
Area			Area of neighbors
Router ID			Neighbor router ID
Address			Neighbor interface address
Pri			Router priority
Dead time			Dead interval remained
Interface			The Interface connected to neighbors
State			Neighbor state: Down, Init, Attempt, 2-Way, Exstart,
			Exchange, Loading or Full

display ospf peer statistics

Syntax display ospf [ process-id] peer statistics

View Any view

Parameters process-id: OSPF process ID, in the range 1 to 65535.

Description Use the display ospf peer statistics command to display OSPF neighbor statistics.