3Com MSR 30, MSR 50 manual Display firewall-statistics, Firewall default, Fragments-inspect

1992 CHAPTER 130: PACKET FILTER FIREWALL CONFIGURATION COMMANDS

Table 515 Description on the fields of display firewall ethernet-frame-filter

FieldDescription

Out-bound Policy Indicates an outbound ACL rule has been configured on the interface.

display firewall-statistics

Syntax	display firewall-statistics { all interface interface-typeinterface-num
	fragments-inspect }
View	Any view
Parameter	all: Displays the firewall statistics on all interfaces.
	interface-typeinterface-num: Displays the firewall statistics about the specified
	interface.
	fragments-inspect: Displays statistics about fragments inspection.
Description	Use the display firewall-statisticscommand to view the statistics of the
	firewall.
Related command:	firewall fragments-inspect.
n At most 50 fragments with the same 16-bit identifier in IP header can be recorded.
Example	# Display statistics information about fragments inspection.
	<Sysname> display firewall-statistics fragments-inspect
	Fragments inspection is enabled.
	The high-watermark for clamping is 10000.
	The low-watermark for clamping is 1000.
	Current records for fragments inspection is 0.
	Table 516 Description on the fields of the display firewall-statistics command
	Field	Description
	Fragments inspection is enabled	The fragments inspection function of
		the firewall is enabled
	The high-watermark for clamping	The high watermark value of the
		number of fragment status records
	The low-watermark for clamping	The low watermark value of the
		number of fragment status records
	Current records for fragments inspection	The current number of records for
		fragments inspection

firewall default

Syntax firewall default { permit deny }