3Com MSR 50, MSR 30 manual Display nat address-group, View Any view Parameter None, Information

2019

Example # Display connection-limit statistics.

<Sysname> display connection-limit statistics
source-ip	dest-ip	dest-port	vpn-instance
192.168.0.210	---	---	---

--------------------------------------------------------------------------

NAT	amount	upper-limit	lower-limit	limit-flag
	2	200	100	0
	source-ip	dest-ip	dest-port	vpn-instance
	192.168.0.210	---	---	---

--------------------------------------------------------------------------

NAT	amount	upper-limit	lower-limit	limit-flag
	2	50	20	0

Table 522 Description on the fields of the display connection-limit statistics command

Field	Description
source-ip	Source IP address
dest-ip	Destination IP address
dest-port	Destination port number
vpn-instance	Name of the MPLS VPN instance that a connection belongs to
amount	Number of connections allowed to establish
upper-limit	Upper limit of connections
lower-limit	Lower limit of connections
limit-flag	Whether new connections are allowed, 0 means yes, 1 means no

display nat address-group

Syntax	display nat address-group
View	Any view
Parameter	None
Description	Use the display nat address-groupcommand to display the NAT address pool
	information.

Example # Display the NAT address pool information.

<Sysname> display		nat	address-group
NAT address-group		information:
There	are currently		1 nat address-group(s)
1	: from		202.110.10.10 to	202.110.10.15

Table 523 Description on the fields of the display nat address-group command

Field Description

NAT address-group information

There are currently 1 nat address-group(s)

1 : from 202.110.10.10 to 202.110.10.15

NAT address pool information

There is one NAT address group

The range of IP addresses in address pool 1 is from 202.110.10.10 to 202.110.10.15